View HMC789ST89E_9048529.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

for price, delivery and to place orders: hittite microwave corporation, 2 e lizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite .com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 1 HMC789ST89E v02.0314 ingap hbt gain block mmic amplifier, 0.7 -2.8 ghz general description features functional diagram the HMC789ST89E is a high linearity gaas ingap hbt gain block mmic operating from 0.7 to 2.8 ghz and packaged in an industry standard sot89 package. utilizing a minimum number of external components and a single +5v supply, the ampliier output ip3 can be optimized to +45 dbm. the high output ip3 and high gain make the HMC789ST89E ideal for use in pa driver & pre-driver applications in cellular/4g and fixed wireless. high output ip3: +42 dbm high output p1db: +25 dbm high gain: 18 db single supply: +5v 45% pae @ +25 dbm pout industry standard sot89 package electrical speciications, t a = +25c, vs= +5v [1] typical applications the HMC789ST89E is ideal for: ? cellular/4g ? fixed wireless & wlan ? catv, cable modem & dbs ? microwave radio & test equipment ? if & rf applications parameter min. ty p. max. min. ty p. max. min. ty p. max. units frequency range 810 - 960 1710 - 1990 2420 - 2700 mhz gain 17 18 12 13.5 10 11 db gain variation over temperature 0.01 0.01 0.01 db / c input return loss 12 12 10 db output return loss 20 15 10 db output power for 1db compression (p1db) 21 23.5 23 25 22 24 dbm saturated output power (psat) 25.5 27 26 dbm output third order intercept (ip3) [2] 42 42 42 dbm noise figure 3.8 3.8 3.8 db supply current (icq) 125 150 125 150 125 150 ma [1] speciications and data relect HMC789ST89E measured using the respective application circuits for each designated frequency band found herein. contact the hmc applications group for assistance in optimizing performance for your application. [2] two-tone output power of +10 dbm per tone, 1 mhz spacing. information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se , no r for any infring em en ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an al og .com app li cation sup po rt: p ho ne: 1-800-analog-d
for price, delivery and to place orders: hittite microwave corporation, 2 e lizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite .com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 2 HMC789ST89E v02.0314 ingap hbt gain block mmic amplifier, 0.7 -2.8 ghz input return loss vs. temperature @ 900 mhz output return loss vs. temperature @ 900 mhz broadband gain & return loss @ 900 mhz gain vs. temperature @ 900 mhz p1db vs. temperature @ 900 mhz psat vs. temperature @ 900 mhz -25 -15 -5 5 15 25 0.4 0.6 0.8 1 1.2 1.4 s21 s11 s22 response (db) frequency (ghz) 10 12 14 16 18 20 22 24 0.7 0.8 0.9 1 1.1 +25 c +85 c - 40 c gain (db) frequency (ghz) -20 -15 -10 -5 0 0.7 0.8 0.9 1 1.1 +25 c +85 c - 40 c return loss (db) frequency (ghz) -30 -25 -20 -15 -10 -5 0 0.7 0.8 0.9 1 1.1 +25 c +85 c - 40 c return loss (db) frequency (gh) 20 21 22 23 24 25 26 0.7 0.8 0.9 1 1.1 +25 c +85 c - 40 c p1db (dbm) frequency (ghz) 22 23 24 25 26 27 28 0.7 0.8 0.9 1 1.1 +25 c +85 c - 40 c psat (dbm) frequency () information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se , no r for any infring em en ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an al og .com app li cation sup po rt: p ho ne: 1-800-analog-d
for price, delivery and to place orders: hittite microwave corporation, 2 e lizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite .com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 3 HMC789ST89E v02.0314 ingap hbt gain block mmic amplifier, 0.7 -2.8 ghz output ip3 vs. temperature @ 900 mhz pout = 10 dbm each tone output ip3 vs. output power @ 900 mhz noise figure vs. temperature @ 900 mhz gain, power & ip3 vs. supply voltage @ 900 mhz reverse isolation vs. temperature @ 900 mhz power compression @ 900 mhz 30 35 40 45 50 0.7 0.8 0.9 1 1.1 +25 c +85 c - 40 c ip3 (db) frequency (ghz) 30 35 40 45 50 0 2 4 6 8 10 12 14 16 18 +25 c +85 c - 40 c ip3 (db) single tone pout (dbm) 0 2 4 6 8 0.75 0.8 0.85 0.9 0.95 1 +25 c +85 c - 40 c nf (db) frequency (ghz) -40 -30 -20 -10 0 0.7 0.8 0.9 1 1.1 +25 c +85 c - 40 c isolation (db) frequency () 10 20 30 40 50 4.5 5 5.5 gain p1db oip3 gain (db), p1db (dbm), oip3 (dbm) supply voltage 0 10 20 30 40 50 -8 -4 0 4 8 12 pout gain pae pout (dbm), gain (db), pae (%) input poe (dbm) information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se , no r for any infring em en ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an al og .com app li cation sup po rt: p ho ne: 1-800-analog-d
for price, delivery and to place orders: hittite microwave corporation, 2 e lizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite .com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 4 HMC789ST89E v02.0314 ingap hbt gain block mmic amplifier, 0.7 -2.8 ghz acpr vs. supply voltage @ 880 mhz cdma is95, 9 channels forward input return loss vs. temperature @ 1900 mhz output return loss vs. temperature @ 1900 mhz broadband gain & return loss @ 1900 mhz gain vs. temperature @ 1900 mhz -90 -80 -70 -60 -50 -40 -30 -20 0 2 4 6 8 10 12 14 16 18 20 22 acpr (dbc) channel power (dbm) souc acpr ca s95uc 880 h o bw 1228 h od l 9 c 5 55 45 -20 -10 0 10 20 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 s21 s11 s22 response (db) frequency (ghz) 10 12 14 16 1.7 1.8 1.9 2 2.1 +25 c +85 c - 40 c gain (db) frequency (ghz) -16 -12 -8 -4 0 1.7 1.8 1.9 2 2.1 +25 c +85 c - 40 c return loss (db) frequency (gh) -20 -15 -10 -5 0 1.7 1.8 1.9 2 2.1 +25 c +85 c - 40 c return loss (db) frequency (ghz) information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se , no r for any infring em en ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an al og .com app li cation sup po rt: p ho ne: 1-800-analog-d
for price, delivery and to place orders: hittite microwave corporation, 2 e lizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite .com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 5 HMC789ST89E v02.0314 ingap hbt gain block mmic amplifier, 0.7 -2.8 ghz output ip3 vs. temperature @ 1900 mhz noise figure vs. temperature @ 1900 mhz reverse isolation vs. temperature @ 1900 mhz p1db vs. temperature @ 1900 mhz psat vs. temperature @ 1900 mhz output ip3 vs. output power @ 1900 mhz 22 23 24 25 26 27 28 1.7 1.8 1.9 2 2.1 +25 c +85 c - 40 c p1db (dbm) frequency (ghz) 24 25 26 27 28 29 30 1.7 1.8 1.9 2 2.1 +25 c +85 c - 40 c psat (dbm) frequency () 30 35 40 45 50 1.7 1.8 1.9 2 2.1 +25 c +85 c - 40 c ip3 (db) frequency (ghz) 30 35 40 45 50 0 2 4 6 8 10 12 14 16 18 +25 c +85 c - 40 c ip3 (db) single tone pout (dbm) 0 2 4 6 8 1.7 1.8 1.9 2 2.1 +25 c +85 c - 40 c nf (db) frequency (ghz) -30 -25 -20 -15 -10 1.7 1.8 1.9 2 2.1 +25 c +85 c - 40 c i solation (db) frequency () information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se , no r for any infring em en ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an al og .com app li cation sup po rt: p ho ne: 1-800-analog-d
for price, delivery and to place orders: hittite microwave corporation, 2 e lizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite .com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 6 HMC789ST89E v02.0314 ingap hbt gain block mmic amplifier, 0.7 -2.8 ghz gain, power & ip3 vs. supply voltage @ 1900 mhz acpr vs. supply voltage @ 1960 mhz cdma 2000, 9 channels forward power compression @ 1900 mhz broadband gain & return loss @ 2600 mhz gain vs. temperature @ 2600 mhz acpr vs. supply voltage @ 2140 mhz w-cdma, 64 dpch 10 20 30 40 50 4.5 5 5.5 gain p1db oip3 gain (db), p1db (dbm), oip3 (dbm) supply voltage 0 10 20 30 40 50 -1 3 7 11 15 19 pout gain pae pout (dbm), gain (db), pae (%) input pe (dbm) -90 -80 -70 -60 -50 -40 -30 -20 1 3 5 7 9 11 13 15 17 19 21 acpr (dbc) channel power (dbm) souc acpr ca 2000uc 1960 h o bw 1228 h od l 9 c 5 55 45 -80 -70 -60 -50 -40 -30 -20 0 2 4 6 8 10 12 14 16 18 20 acpr (dbc) channel power (dbm) sourc acpr w-caruc 2140 h ro bw 384 h 64 pch 5 55 45 -20 -10 0 10 20 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 s21 s11 s22 response (db) frequency (ghz) 8 9 10 11 12 13 14 2.3 2.4 2.5 2.6 2.7 2.8 +25 c +85 c - 40 c gain (db) frequency (ghz) information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se , no r for any infring em en ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an al og .com app li cation sup po rt: p ho ne: 1-800-analog-d
for price, delivery and to place orders: hittite microwave corporation, 2 e lizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite .com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 7 HMC789ST89E v02.0314 ingap hbt gain block mmic amplifier, 0.7 -2.8 ghz output ip3 vs. temperature @ 2600 mhz output ip3 vs. output power @ 2600 mhz input return loss vs. temperature @ 2600 mhz output return loss vs. temperature @ 2600 mhz p1db vs. temperature @ 2600 mhz psat vs. temperature @ 2600 mhz -25 -20 -15 -10 -5 0 2.3 2.4 2.5 2.6 2.7 2.8 +25 c +85 c - 40 c return loss (db) frequency (gh) -20 -15 -10 -5 0 2.3 2.4 2.5 2.6 2.7 2.8 +25 c +85 c - 40 c return loss (db) frequency (gh) 22 23 24 25 26 2.3 2.4 2.5 2.6 2.7 2.8 +25 c +85 c - 40 c p1db (dbm) frequency (ghz) 22 23 24 25 26 27 28 2.3 2.4 2.5 2.6 2.7 2.8 +25 c +85 c - 40 c psat (dbm) frequency (gh) 30 35 40 45 50 2.3 2.4 2.5 2.6 2.7 2.8 +25 c +85 c - 40 c ip3 (db) frequency (ghz) 30 35 40 45 50 0 2 4 6 8 10 12 14 16 18 +25 c +85 c - 40 c ip3 (db) single tone pout (dbm) information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se , no r for any infring em en ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an al og .com app li cation sup po rt: p ho ne: 1-800-analog-d
for price, delivery and to place orders: hittite microwave corporation, 2 e lizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite .com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 8 HMC789ST89E v02.0314 ingap hbt gain block mmic amplifier, 0.7 -2.8 ghz noise figure vs. temperature @ 2600 mhz reverse isolation vs. temperature @ 2600 mhz power compression @ 2600 mhz gain, power & ip3 vs. supply voltage @ 2600 mhz 0 2 4 6 8 2.3 2.4 2.5 2.6 2.7 2.8 +25 c +85 c - 40 c nf (db) frequency (ghz) -25 -20 -15 -10 2.3 2.4 2.5 2.6 2.7 2.8 +25 c +85 c - 40 c i solation (db) frequency () 10 20 30 40 50 4.5 5 5.5 gain p1db oip3 gain (db), p1db (dbm), oip3 (dbm) supply voltage 0 10 20 30 40 0 5 10 15 20 pout gain pae pout (dbm), gain (db), pae (%) input power (dbm) information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se , no r for any infring em en ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an al og .com app li cation sup po rt: p ho ne: 1-800-analog-d
for price, delivery and to place orders: hittite microwave corporation, 2 e lizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite .com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 9 HMC789ST89E v02.0314 ingap hbt gain block mmic amplifier, 0.7 -2.8 ghz outline drawing part number package body material lead finish msl rating package marking [1] HMC789ST89E rohs-compliant low stress injection molded plastic 100% matte sn msl1 [2] h789 xxxx [1] 4-digit lot number xxxx [2] max peak relow temperature of 260 c package information absolute maximum ratings collector bias voltage (vcc) +6.0 v rf input power (rfin)(vs +5vdc) +18 dbm junction temperature 150 c continuous pdiss (t = 85 c) (derate 13.0 mw/c above 85 c) 0.85 w thermal resistance (junction to ground paddle) 77 c/w storage temperature -65 to +150 c operating temperature -40 to +85 c electrostatic sensitive device observe handling precautions notes: 1. package body material: molding compound mp-180s or equivalent. 2. lead material: cu w/ ag spot plating. 3. lead plating: 100% matte tin. 4. dimensions are in inches [millimeters] 5. dimension does not include moldflash of 0.15mm per side. 6. dimension does not include moldflash of 0.25mm per side. 7. all ground leads must be soldered to pcb rf ground. information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se , no r for any infring em en ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an al og .com app li cation sup po rt: p ho ne: 1-800-analog-d
for price, delivery and to place orders: hittite microwave corporation, 2 e lizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite .com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 10 HMC789ST89E v02.0314 ingap hbt gain block mmic amplifier, 0.7 -2.8 ghz pin descriptions pin number function description interface schematic 1 rfin this pin is dc coupled. off chip matching components are required. see application circuit herein. 3 rfout rf output and dc bias input for the ampliier. off chip matching components are required. see application circuit herein. 2, 4 gnd these pins & package bottom must be connected to rf/dc ground. information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se , no r for any infring em en ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an al og .com app li cation sup po rt: p ho ne: 1-800-analog-d
for price, delivery and to place orders: hittite microwave corporation, 2 e lizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite .com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 11 HMC789ST89E v02.0314 ingap hbt gain block mmic amplifier, 0.7 -2.8 ghz 900 mhz application circuit this circuit was used to specify the performance for 810-960 mhz operation. contact the hmc applications group for assistance in optimizing performance for your application. recommended component values c1 10 pf c2 100 pf c3 100 pf c4 1000 pf c5 2.2 f c6 100 pf c7 1.2 pf l1 18 nh l2 3.8 nh information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se , no r for any infring em en ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an al og .com app li cation sup po rt: p ho ne: 1-800-analog-d
for price, delivery and to place orders: hittite microwave corporation, 2 e lizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite .com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 12 HMC789ST89E v02.0314 ingap hbt gain block mmic amplifier, 0.7 -2.8 ghz 900 mhz evaluation pcb the circuit board used in this application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation board should be mounted to an appropriate heat sink. the evaluation circuit board shown is available from hittite upon request. list of materials for 900 mhz evaluation pcb 126222 [1] item description j1 - j2 pcb mount sma connector j3 2 mm dc header c1 10 pf capacitor, 0402 pkg. c2 100 pf capacitor, 0402 pkg. c3 100 pf capacitor, 0402 pkg. c4 1000 pf capacitor, 0402 pkg. c5 2.2 f capacitor, tantalum c6 100 pf capacitor, 0402 pkg. c7 1.2 pf capacitor, 0402 pkg. l1 18 nh inductor, 0402 pkg. l2 3.8 nh inductor, 0402 pkg. u1 HMC789ST89E linear ampliier pcb [2] 126220 evaluation pcb [1] reference this number when ordering complete evaluation pcb [2] circuit board material: fr4 information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se , no r for any infring em en ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an al og .com app li cation sup po rt: p ho ne: 1-800-analog-d
for price, delivery and to place orders: hittite microwave corporation, 2 e lizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite .com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 13 HMC789ST89E v02.0314 ingap hbt gain block mmic amplifier, 0.7 -2.8 ghz 1900 mhz application circuit this circuit was used to specify the performance for 1710-19 90 mhz operation. contact the hmc applications group for assistance in optimizing performance for yo ur application. recommended component values c1 2.2 pf c2 5.0 pf c3 100 pf c4 1000 pf c5 2.2 f c6 20 pf c7 1.1 pf l1 20 nh r1 0.0 ohm information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se , no r for any infring em en ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an al og .com app li cation sup po rt: p ho ne: 1-800-analog-d
for price, delivery and to place orders: hittite microwave corporation, 2 e lizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite .com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 14 HMC789ST89E v02.0314 ingap hbt gain block mmic amplifier, 0.7 -2.8 ghz 1900 mhz evaluation pcb the circuit board used in this application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation board should be mounted to an appropriate heat sink. the evaluation circuit board shown is available from hittite upon request. list of materials for 1900 mhz evaluation pcb 126223 [1] item description j1 - j2 pcb mount sma connector j3 2 mm dc header c1 2.2 pf capacitor, 0402 pkg. c2 5.0 pf capacitor, 0402 pkg. c3 100 pf capacitor, 0402 pkg. c4 1000 pf capacitor, 0402 pkg. c5 2.2 f capacitor, tantalum c6 20 pf capacitor, 0402 pkg. c7 1.1 pf capacitor, 0402 pkg. l1 18 nh inductor, 0402 pkg. r1 0.0 ohm resistor, 0402 pkg. u1 HMC789ST89E linear ampliier pcb [2] 126220 evaluation pcb [1] reference this number when ordering complete evaluation pcb [2] circuit board material: fr4 information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se , no r for any infring em en ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an al og .com app li cation sup po rt: p ho ne: 1-800-analog-d
for price, delivery and to place orders: hittite microwave corporation, 2 e lizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite .com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 15 HMC789ST89E v02.0314 ingap hbt gain block mmic amplifier, 0.7 -2.8 ghz 2600 mhz application circuit this circuit was used to specify the performance for 2420-2700 mhz operation. contact the hmc applications group for assistance in optimizing performance for your application. recommended component values c1 1.5 pf c2 1.5 pf c3 100 pf c4 1000 pf c5 2.2 f c6 20 pf c7 0.3 pf l1 18 nh l2 12 nh r1 0.0 ohm information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se , no r for any infring em en ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an al og .com app li cation sup po rt: p ho ne: 1-800-analog-d
for price, delivery and to place orders: hittite microwave corporation, 2 e lizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite .com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - driver & gain block - smt 16 HMC789ST89E v02.0314 ingap hbt gain block mmic amplifier, 0.7 -2.8 ghz 2600 mhz evaluation pcb the circuit board used in this application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation board should be mounted to an appropriate heat sink. the evaluation circuit board shown is available from hittite upon request. list of materials for 2600 mhz evaluation pcb 125682 [1] item description j1 - j2 pcb mount sma connector j3 2 mm dc header c1 1.5 pf capacitor, 0402 pkg. c2 1.5 pf capacitor, 0402 pkg. c3 100 pf capacitor, 0402 pkg. c4 1000 pf capacitor, 0402 pkg. c5 2.2 f capacitor, tantalum c6 20 pf capacitor, 0402 pkg. c7 0.3 pf capacitor, 0402 pkg. l1 18 nh inductor, 0402 pkg. r1 0.0 ohm resistor, 0402 pkg. u1 HMC789ST89E linear ampliier pcb [2] 125220 evaluation pcb [1] reference this number when ordering complete evaluation pcb [2] circuit board material: fr4 information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se , no r for any infring em en ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an al og .com app li cation sup po rt: p ho ne: 1-800-analog-d

▲Up To Search▲

Price & Availability of HMC789ST89E

	To Download HMC789ST89E Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .